Dependencies: libiconv libpaper psutils libgcc gcc
Source Code: a2ps-4.15.2.tar.gz | File info | Developer | Date Created: March 20, 2023
Dependencies: libgcrypt libgpgerror pcre zlib libgcc gcc
Source Code: aide-0.17.3.tar.gz | File info | Developer | Date Created: June 5, 2021
Aide requires some configuration before use. See the documentation in the /usr/local/doc/aide directory and in the Details link below. A sample aide.conf file is in /usr/local/doc/aide and should be placed in /usr/local/etc.
Dependencies: openssl ncurses libiconv openldap sasl libintl libgcc gcc
Source Code: alpine-2.00.tar.gz | File info | Developer | Date Created: September 3, 2008
Dependencies:
Source Code: analog-6.0.tar.gz | File info | Developer | Date Created: May 17, 2008
The analog program requires configuration. Information on how to do this is in the various files and directories in /usr/local/analog-6.0.
Dependencies: apr aprutil expat libiconv openldap sasl zlib openssl libgcc gcc
Source Code: httpd-2.2.34.tar.gz | File info | Developer | Date Created: October 15, 2017
Documentation can be found in /usr/local/doc/apache. The configuration files in /usr/local/apache2/conf must be edited to fit your site’s needs, including ssl support. If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost.. The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in OpenSSH installation page where you can determine how to set up the randomness features required when using openssl.
Dependencies: readline ncurses pcre libgcc gcc
Source Code: apachetop-0.12.5.tar.gz | File info | Developer | Date Created: May 17, 2008
Apachetop requires that readline, ncurses, and pcre be installed, and to obtain the needed /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 files, you should install either libgcc-3.3 or gcc-3.3.2 or higher.
Dependencies:
Source Code: apg-2.2.3.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libpcap
Source Code: arping-2.22.tar.gz | File info | Developer | Date Created: July 3, 2021
Dependencies: libpcap libiconv libintl libgcc gcc
Source Code: arpscan-1.9.tar.gz | File info | Developer | Date Created: July 25, 2013
Dependencies:
Source Code: ascii-3.30.tar.gz | File info | Developer | Date Created: June 8, 2024
Dependencies: python
Source Code: asciidoc-8.6.9.tar.gz | File info | Developer | Date Created: March 17, 2014
Dependencies: ncurses libiconv libgcc gcc
Source Code: aspell-0.60.8.1.tar.gz | File info | Developer | Date Created: January 1, 2024
Dependencies: glib libiconv libgcc gcc
Source Code: atk-1.18.0.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: guile libiconv libtool libintl libxml2 zlib gmp libgcc gcc
Source Code: autogen-5.18.5.tar.gz | File info | Developer | Date Created: May 16, 2015
Dependencies: libiconv libintl libgcc gcc
Source Code: autossh-1.4g.tar.gz | File info | Developer | Date Created: January 29, 2019
Dependencies:
Source Code: balance-3.57.tar.gz | File info | Developer | Date Created: May 18, 2015
Dependencies:
Source Code: bar-1.11.1.tar.gz | File info | Developer | Date Created: April 28, 2011
Dependencies: libintl libiconv libgcc gcc
Source Code: bash-5.2.21.tar.gz | File info | Developer | Date Created: November 10, 2023
Dependencies: zlib libgcc gcc
Source Code: bcrypt-1.1.tar.gz | File info | Developer | Date Created: May 17, 2008
By default, bcrypt will compress input files before encryption, remove input files after they are processed (assuming they are processed successfully) and overwrite input files with random data to prevent data recovery. If you use bcrypt make sure you have read the /usr/local/doc/bcrypt/README file and do man bcrypt. If you bcrypt a file and then forget your pass phrase, you won’t get it back. There are options to bcrypt so that the original file is not deleted.
Dependencies: openssl libiconv libintl readline libxml2 zlib gcc libgcc
Source Code: bind-9.11.37.tar.gz | File info | Developer | Date Created: March 26, 2022
Dependencies: openssl libiconv libintl ncurses libxml2 zlib gcc libgcc
Source Code: bind-9.11.5p4.tar.gz | File info | Developer | Date Created: March 9, 2019
Dependencies: openssl libiconv libintl ncurses libxml2 zlib gcc libgcc
Source Code: bind-9.12.4p2.tar.gz | File info | Developer | Date Created: July 7, 2019
Dependencies: zlib libiconv libintl libgcc gcc
Source Code: binutils-2.23.1.tar.gz | File info | Developer | Date Created: November 19, 2012
Dependencies: flex autoconf gettext m4 libiconv libgcc gcc ncurses
Source Code: bison-3.8.2.tar.gz | File info | Developer | Date Created: October 10, 2021
Dependencies: libiconv db gsl libgcc gcc
Source Code: bogofilter-1.2.4.tar.gz | File info | Developer | Date Created: July 7, 2013
Dependencies: python pygments
Source Code: bpython-0.9.7.1.tar.gz | File info | Developer | Date Created: November 5, 2010
python and pygments
Dependencies: ncurses libgcc libiconv libintl
Source Code: bvi-1.4.2.tar.gz | File info | Developer | Date Created: March 11, 2023
Dependencies: libgcc gcc
Source Code: bzip2-1.0.8.tar.gz | File info | Developer | Date Created: February 9, 2020
Dependencies: render xrender renderproto expat fontconfig freetype libpng zlib libiconv libgcc gcc
Source Code: cairo-1.9.10.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libiconv libgcc gcc
Source Code: cdrtools-2.01.01a35.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: openssl db expat fontconfig freetype gd graphviz libiconv libintl jpeg openldap pcre libpng sasl zlib libgcc gcc
Source Code: cfengine-3.3.8.tar.gz | File info | Developer | Date Created: July 28, 2017
Dependencies: libgcc gcc
Source Code: check-0.11.0.tar.gz | File info | Developer | Date Created: August 1, 2017
Dependencies:
Source Code: chkrootkit-0.58.tar.gz | File info | Developer | Date Created: July 4, 2023
To use chkrootkit, you must be root and cd to /usr/local/bin. While in that directory, you run the command ./chkrootkit or sh ./chkrootkit. Make sure you read the various README files in /usr/local/doc/chkrootkit before you use chkrootkit so that you understand the results. Also study the chkrootkit home page at the Details link below. chkrootkit is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility.
Dependencies:
Source Code: ckermit-9.0.302.tar.gz | File info | Developer | Date Created: September 2, 2012
Dependencies: autogen bzip2 guile readline coreutils libidn gmp gnutls libtool nettle pcre curl openssl libiconv libintl libtool libssh2 libxml2 ncurses zlib gcc libgcc
Source Code: clamav-0.103.2.tar.gz | File info | Developer | Date Created: April 18, 2021
Dependencies: ncurses libgcc gcc
Source Code: cmake-2.8.12.1.tar.gz | File info | Developer | Date Created: November 11, 2013
Dependencies: libiconv libintl libgcc gcc
Source Code: cpio-2.15.tar.gz | File info | Developer | Date Created: January 21, 2024
Dependencies: libiconv libintl ncurses libgcc gcc
Source Code: cscope-15.8a.tar.gz | File info | Developer | Date Created: October 4, 2012
Dependencies: libgcc gcc
Source Code: db-4.7.25.NC.tar.gz | File info | Developer | Date Created: March 17, 2010
Dependencies: expat libgcc gcc
Source Code: dbus-1.0.2.tar.gz | File info | Developer | Date Created: May 17, 2008
expat and libgcc_s.so.1 must be in /usr/local/lib by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
After installation, you must run the command
dbus-uuidgen --ensure
so that programs like gimp, which depend on dbus, will start properly.
Dependencies: expat libiconv glib dbus libgcc gcc
Source Code: dbusglib-0.74.tar.gz | File info | Developer | Date Created: May 17, 2008
expat, libiconv, glib, dbus, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: bash
Source Code: dejagnu-1.6.3.tar.gz | File info | Developer | Date Created: June 19, 2021
Dejagnu may need the Tcl and Expect packages also.
Dependencies: openssl libgcc gcc
Source Code: dhcp-4.3.6p1.tar.gz | File info | Developer | Date Created: August 15, 2018
Dependencies: libiconv libintl libgcc gcc
Source Code: di-4.50.tar.gz | File info | Developer | Date Created: April 13, 2021
Dependencies: python pysqlite
Source Code: diffuse-0.4.8.tar.gz | File info | Developer | Date Created: October 5, 2018
Dependencies:
Source Code: disktool-2.0c.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libpcap ncurses
Source Code: dnstop-20140915.tar.gz | File info | Developer | Date Created: June 20, 2015
Dependencies: libiconv libintl libgcc gcc
Source Code: dos2unix-7.5.0.tar.gz | File info | Developer | Date Created: June 6, 2023
Dependencies: libiconv libgcc gcc
Source Code: doxygen-1.8.9.1.tar.gz | File info | Developer | Date Created: April 10, 2015
Dependencies: libiconv libintl libgcc gcc
Source Code: dwdiff-2.1.1.tar.gz | File info | Developer | Date Created: July 29, 2017
To use the color option, you will need a terminal that supports color. This package does not yet have unicode support.
Dependencies:
Source Code: ed-1.20.2.tar.gz | File info | Developer | Date Created: May 1, 2024
Dependencies: libgcc gcc
Source Code: expat-2.0.1.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: imlib2 freetype giblib libpng zlib libgcc gcc
Source Code: feh-1.14.2.tar.gz | File info | Developer | Date Created: July 5, 2011
imlib2, freetype, giblib, libpng, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libiconv ncurses libgcc gcc
Source Code: fish-1.22.1.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libiconv libintl libgcc gcc
Source Code: flex-2.6.4.tar.gz | File info | Developer | Date Created: February 19, 2019
Dependencies: freetype zlib expat libiconv libgcc gcc
Source Code: fontconfig-2.8.0.tar.gz | File info | Developer | Date Created: August 13, 2010
Remember that the /usr/local/etc/fonts/fonts.conf file may need to be edited to point to the proper font directories. I add the /usr/openwin/lib/X11/fonts and /usr/openwin/lib/locale directories into the Font directory list.
Dependencies:
Source Code: fping-3.9.tar.gz | File info | Developer | Date Created: March 15, 2014
Dependencies: openssl netsnmp gdbm openldap mysql zlib sasl libiconv libintl libtool gcc libgcc
Source Code: freeradius-3.0.10.tar.gz | File info | Developer | Date Created: September 2, 2022
Dependencies: libtool unixODBC openssl zlib ncurses readline libiconv libintl libgcc gcc
Source Code: freetds-1.1.24.tar.gz | File info | Developer | Date Created: February 11, 2020
The new version has several new dependencies and unixOBDC support has been added.
Dependencies: zlib libgcc gcc
Source Code: freetype-2.4.2.tar.gz | File info | Developer | Date Created: August 13, 2010
Dependencies: zlib rrdtool libgcc gcc
Source Code: ganglia-3.1.1.tar.gz | File info | Developer | Date Created: July 28, 2017
Dependencies: libiconv
Source Code: gcc-3.4.6.tar.gz | File info | Developer | Date Created: May 17, 2008
Installs in /usr/local. This package includes the GNU C, C++, and f77 suites and support files. These gcc packages require the installation of libiconv. It was compiled to use the SUN assembler and loader usually in /usr/ccs/bin if the SUNW developer packages are installed. If you need to do 64-bit compiles, you should use the gcc-3.4.3 that comes with Solaris 10 in /usr/sfw/bin.
Dependencies: libiconv libintl
Source Code: gcc-4.7.2.tar.gz | File info | Developer | Date Created: May 9, 2013
Dependencies: libxml2 orbit2 xmlparser gtk atk glib pango libiconv libintl xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: gconf-2.20.1.tar.gz | File info | Developer | Date Created: May 17, 2008
If you have installed the gtk+ package and its dependencies, all the Dependencies below should be installed already except for orbit2, libxml2, and xmlparser.
Dependencies:
libxml2, orbit2, xmlparser, gtk+, atk, glib, pango, libiconv, libintl, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libiconv libintl libgcc gcc
Source Code: gdbm-1.9.1.tar.gz | File info | Developer | Date Created: November 13, 2011
Dependencies: libxml2 gtk atk glib pango libiconv libintl xrender cairo render expat fontconfig freetype libpng zlib renderproto libgcc gcc
Source Code: gdmap-0.8.1.tar.gz | File info | Developer | Date Created: June 18, 2008
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the libxml2 package.
Dependencies:
libxml2, gtk+, atk, glib, pango, libiconv, libintl, xrender, cairo, render, expat, fontconfig, freetype, libpng, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: zlib libgcc gcc
Source Code: geoip-1.4.5.tar.gz | File info | Developer | Date Created: January 19, 2009
zlib and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages.
Dependencies: gtk glib openssl libiconv readline ncurses libgcc gcc
Source Code: gftp-2.0.18rc1.tar.gz | File info | Developer | Date Created: May 17, 2008
gftp may require that the following packages also be installed - gtk-1.2.10, glib-1.2.10, openssl-0.9.7g, libiconv, readline, ncurses, and the libgcc_s.so.1 needs to be in /usr/local/lib. This comes from either the libgcc-3.3 or the gcc-3.3.2 or higher packages.
Dependencies: expat xrender cairo libpng fontconfig freetype pixman libiconv libidn zlib libgcc gcc
Source Code: ghostscript-9.05.tar.gz | File info | Developer | Date Created: February 11, 2012
expat, xrender, cairo, libpng, fontconfig, freetype, pixman, libiconv, libidn, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. See Ghostscript installation comments for some required installation settings and other information.
Dependencies: imlib2 freetype zlib libgcc gcc
Source Code: giblib-1.2.4.tar.gz | File info | Developer | Date Created: June 28, 2010
imlib2, freetype, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: curl libgcc gcc zlib openssl libiconv libintl perl python expat gmp gnutls nettle libidn libssh2
Source Code: git-2.8.1.tar.gz | File info | Developer | Date Created: May 2, 2016
If you want to use various extra features of git, you may need to install tcl and tk, openldap, perl or python, and any dependencies they might have.
Dependencies: libiconv zlib libintl libgcc gcc
Source Code: glib-2.25.13.tar.gz | File info | Developer | Date Created: August 16, 2010
Dependencies: libgcc gcc
Source Code: gmp-4.2.1.tar.gz | File info | Developer | Date Created: May 17, 2008
These libraries are compiled in 64-bit mode using gcc. You will need to install either libgcc-3.4.6 or gcc-3.4.6. You may also need to set the environment variable LD_LIBRARY_PATH_64 to /usr/local/lib/amd64 to use the gmp libraries. By default, the libgmp libraries are put into /usr/local/lib. You may want to move them to /usr/local/lib/amd64.
Dependencies: libiconv libintl readline openssl curl libssh2 zlib libgcc gcc
Source Code: gnupg-1.4.21.tar.gz | File info | Developer | Date Created: November 20, 2016
Dependencies: autogen gmp nettle libtool guile openssl libiconv libintl zlib libgcc gcc
Source Code: gnutls-3.3.18.tar.gz | File info | Developer | Date Created: September 24, 2015
Dependencies: gpgme gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: gpa-0.7.6.tar.gz | File info | Developer | Date Created: May 17, 2008
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the gpgme and libgpgerror packages.
Dependencies:
libgpgerror, gpgme, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libgpgerror libiconv libgcc gcc
Source Code: gpgme-1.12.0.tar.gz | File info | Developer | Date Created: October 18, 2018
Dependencies: libiconv libintl pcre libgcc gcc
Source Code: grep-3.11.tar.gz | File info | Developer | Date Created: May 15, 2023
Dependencies: rsync gtk atk glib pango libiconv libintl xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: grsync-0.6.1.tar.gz | File info | Developer | Date Created: May 17, 2008
If you have installed the gtk+ package and its dependencies, all the Dependencies below should be installed already except rsync and popt (see the rsync dependencies).
Dependencies:
rsync, gtk+, atk, glib, pango, libiconv, libintl, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: atk pixman glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: gtk-2.12.0.tar.gz | File info | Developer | Date Created: May 17, 2008
See the Dependencies for these packages which may include yet more packages you may need for development work.
Once you install the gtk and other dependency packages, it is important that you test gtk+. This can be done by running the gtk-demo program and seeing if the various examples work. Generally, the gtk-demo, and other programs you build with gtk+, will only work if your font cache is set up properly. This is done by editing the /usr/local/etc/fonts/fonts.conf file so that the font directory list is something like
<,dir>,/usr/share/fonts<,/dir>, <,dir>,/usr/openwin/lib/X11/fonts<,/dir>, <,dir>,~/.fonts<,/dir>,
(this may vary depending on what level of Solaris you are using and how many fonts you want to include.) Then, you must run
/usr/local/bin/fc-cache -f -v
as root, which can take many hours, but when it finishes will give you a succeeded message.
Dependencies: aspell gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: gtkspell-2.0.11.tar.gz | File info | Developer | Date Created: May 17, 2008
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the aspell package.
Dependencies:
aspell, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libiconv libintl ncurses libgcc gcc
Source Code: gtypist-2.8.5.tar.gz | File info | Developer | Date Created: April 9, 2011
libiconv, libintl, ncurses, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: ghostscript xaw3d libiconv libgcc gcc
Source Code: gv-3.7.2.tar.gz | File info | Developer | Date Created: May 1, 2011
ghostscript. xaw3d, libiconv, and libgcc_s.so.1 in /usr/local/lib by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies:
Source Code: gzip-1.13.tar.gz | File info | Developer | Date Created: August 20, 2023
This version is built with –rsyncable capability.
Dependencies: perl
Source Code: help2man-1.49.3.tar.gz | File info | Developer | Date Created: December 23, 2022
Dependencies:
Source Code: hexdump-1.8.tar.gz | File info | Developer | Date Created: December 12, 2012
Dependencies: libiconv libintl libgcc gcc
Source Code: hexedit-1.2.13.tar.gz | File info | Developer | Date Created: August 8, 2013
Dependencies: tcl libgcc gcc
Source Code: hping3-20051105.tar.gz | File info | Developer | Date Created: May 17, 2008
tcl and to obtain /usr/local/lib/libgcc_s.so.1 you will need to have installed libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: gdbm pcre libiconv libgcc gcc
Source Code: hypermail-2.3.0.tar.gz | File info | Developer | Date Created: June 12, 2010
gdbm, pcre, libiconv, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: bzip2 expat fontconfig freetype xz lzma lcms2 libiconv jpeg libpng lcms tiff libxml2 zlib libgcc gcc
Source Code: imagemagick-6.8.6.9.tar.gz | File info | Developer | Date Created: August 28, 2013
Dependencies: bzip2 freetype jpeg libpng tiff libungif zlib libgcc gcc
Source Code: imlib2-1.4.4.tar.gz | File info | Developer | Date Created: June 27, 2010
bzip2, freetype, jpeg, libpng, tiff, libungif, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libgcc gcc openssl zlib
Source Code: iperf-3.9.tar.gz | File info | Developer | Date Created: October 11, 2020
Dependencies: openssl libiconv gcc libgcc
Source Code: ircii-20170708.tar.gz | File info | Developer | Date Created: July 29, 2017
Dependencies: openssl libiconv libintl ncurses glib libgcc gcc
Source Code: irssi-1.2.3.tar.gz | File info | Developer | Date Created: April 12, 2021
Dependencies:
Source Code: john-1.8.0.tar.gz | File info | Developer | Date Created: August 5, 2016
Dependencies: libgcc gcc
Source Code: jpeg-8d.tar.gz | File info | Developer | Date Created: February 16, 2012
The package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. This package also contains the jpeg-6b and jpeg-7 libraries to provide compatibility with the previous packages.
Dependencies:
Source Code: jpeg2ps-1.9.tar.gz | File info | Developer | Date Created: June 30, 2010
Dependencies: openssl libgcc gcc libedit libiconv libintl
Source Code: krb5-1.11.tar.gz | File info | Developer | Date Created: January 13, 2013
Dependencies: jpeg tiff zlib libgcc gcc
Source Code: lcms-1.19.tar.gz | File info | Developer | Date Created: March 21, 2010
jpeg, tiff, zlib, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: openssl libiconv libintl libpcap libgcc gcc
Source Code: ldns-1.6.16.tar.gz | File info | Developer | Date Created: June 21, 2013
Dependencies: ncurses libiconv libintl libgcc gcc
Source Code: less-661.tar.gz | File info | Developer | Date Created: July 3, 2024
Dependencies: readline openssl libiconv libintl expat zlib libgcc gcc
Source Code: lftp-4.8.4.tar.gz | File info | Developer | Date Created: August 21, 2018
Dependencies: bzip2 libiconv libintl expat lzma zlib openssl libgcc gcc
Source Code: libarchive-3.4.2.tar.gz | File info | Developer | Date Created: February 15, 2020
Dependencies: libgcc gcc
Source Code: libart_lgpl-2.3.19.tar.gz | File info | Developer | Date Created: May 17, 2008
requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or later.
Dependencies: glib zlib libxml2 libiconv libgcc gcc
Source Code: libcroco-0.6.1.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: ncurses libgcc gcc
Source Code: libedit-20120601-3.0.tar.gz | File info | Developer | Date Created: July 15, 2012
Dependencies: libiconv libintl libgcc gcc
Source Code: libevent-1.4.14b.tar.gz | File info | Developer | Date Created: August 27, 2010
Dependencies: libiconv libintl libgcc gcc
Source Code: libexif-0.6.16.tar.gz | File info | Developer | Date Created: May 17, 2008
libiconv, libintl, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 packages.
libgcc_s.so libstdc++.a libstdc++.so libstdc++.so.5.0.5 libgcc_s.so.1 libstdc++.la libstdc++.so.5
Since these files are part of the gcc package, you may not need to install it if you already have gcc 3.3 installed. This package is created because some programs will not run without these libraries Available from UNIX Packages
libgcc_s.so libgcc_s.so.1 libstdc++.so libstdc++.so.6 libstdc++.so.6.0.3
Since these files are part of the gcc 3.4.6 package, you may not need to install it if you already have gcc 3.4.6 installed. This package is created because some programs will not run without these libraries – Earlier versions of the files in libgcc can be found at the ftp archive." | Install Location: /usr/local/lib
Dependencies:
Source Code: | File info | Developer | Date Created: May 17, 2008
Dependencies: libgcc gcc libgpgerror
Source Code: libgcrypt-1.9.3.tar.gz | File info | Developer | Date Created: April 24, 2021
See Disclaimer for cryptographic legal issues.
Dependencies: gtk atk glib pango libiconv libintl xrender cairo render expat fontconfig freetype libpng libxml2 zlib renderproto libgcc gcc
Source Code: libglade-2.6.2.tar.gz | File info | Developer | Date Created: June 7, 2008
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the libxml2 package.
Dependencies:
gtk+, atk, glib, pango, libiconv, libintl, xrender, cairo, render, expat, fontconfig, freetype, libpng, libxml2, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libiconv libintl libidn libgcc gcc libgcrypt krb5 libgpgerror
Source Code: libgsasl-1.8.0.tar.gz | File info | Developer | Date Created: August 8, 2012
Dependencies: glib libiconv libxml2 zlib libgcc gcc
Source Code: libgsf-1.14.7.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libintl libgcc gcc
Source Code: libiconv-1.17.tar.gz | File info | Developer | Date Created: May 18, 2022
Dependencies: libiconv libintl libgcc gcc
Source Code: libidn-1.41.tar.gz | File info | Developer | Date Created: October 27, 2022
Dependencies: libiconv libgcc gcc
Source Code: | File info | Developer | Date Created: April 16, 2020
Dependencies: libgcc gcc
Source Code: libnet-1.1.6.tar.gz | File info | Developer | Date Created: August 14, 2018
Dependencies: libpcap libnet
Source Code: libnids-1.24.tar.gz | File info | Developer | Date Created: May 19, 2012
Dependencies: libsigc libgcc gcc
Source Code: libpar2-0.2.tar.gz | File info | Developer | Date Created: May 6, 2009
libsigc++ and that libgcc_s.so.1 and libstdc++.so.5 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: zlib libgcc gcc
Source Code: libpng-1.6.39.tar.gz | File info | Developer | Date Created: December 6, 2022
Dependencies: libcroco libgsf libxml2 gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: librsvg-2.22.3.tar.gz | File info | Developer | Date Created: January 21, 2009
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the libcroco, libgsf, and libxml2 packages.
Dependencies:
libcroco, libgsf, libxml2, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: popt libiconv libintl zlib bzip2 libgcc gcc
Source Code: librsync-0.9.7.tar.gz | File info | Developer | Date Created: March 25, 2010
popt, libiconv, libintl, zlib, bzip2, and to get /usr/local/lib/libgcc_s.so.1, install either libgcc-3.3, gcc-3.3.2, or higher.
Dependencies: libgcc gcc
Source Code: libsigc-2.0.17.tar.gz | File info | Developer | Date Created: May 17, 2008
Having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libgcc gcc
Source Code: libsigsegv-2.10.tar.gz | File info | Developer | Date Created: April 4, 2011
The package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: openssl zlib libgcc gcc
Source Code: libssh2-1.10.0.tar.gz | File info | Developer | Date Created: September 2, 2021
Documentation can be found in /usr/local/doc/libssh2.
Dependencies: openssl zlib libgcc gcc
Source Code: libssh2-1.10.0.tar.gz | File info | Developer | Date Created: March 14, 2022
Documentation can be found in /usr/local/doc/libssh2.
Dependencies: libgcc gcc
Source Code: libtasn1-4.19.0.tar.gz | File info | Developer | Date Created: August 27, 2022
Dependencies: gmp libgcc gcc
Source Code: libuninum-2.7.tar.gz | File info | Developer | Date Created: May 20, 2008
gmp and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages.
Dependencies: zlib libiconv libgcc gcc
Source Code: libxml2-2.9.1.tar.gz | File info | Developer | Date Created: May 8, 2013
Dependencies: libxml2 zlib libiconv libgcrypt libgpgerror libgcc gcc
Source Code: libxslt-1.1.28.tar.gz | File info | Developer | Date Created: May 8, 2013
Dependencies: python
Source Code: logilabastng-0.20.0.tar.gz | File info | Developer | Date Created: April 12, 2010
python
Dependencies: popt gettext libiconv libintl gzip libgcc gcc
Source Code: logrotate-3.8.6.tar.gz | File info | Developer | Date Created: August 14, 2013
Dependencies: gmp readline op zlib libgcc gcc
Source Code: lsh-2.0.tar.gz | File info | Developer | Date Created: May 17, 2008
gmp, readline, op, zlib, and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies:
Source Code: lsof-4.87.tar.gz | File info | Developer | Date Created: January 27, 2013
Dependencies: libgcc gcc
Source Code: lua-5.4.4.tar.gz | File info | Developer | Date Created: December 7, 2022
Dependencies: libgcc gcc
Source Code: lzo-2.10.tar.gz | File info | Developer | Date Created: March 29, 2020
Dependencies: libsigsegv libgcc gcc
Source Code: m4-1.4.19.tar.gz | File info | Developer | Date Created: June 4, 2021
Dependencies: libgcc gcc gmp guile libtool libiconv libintl
Source Code: make-4.4.1.tar.gz | File info | Developer | Date Created: February 27, 2023
Dependencies: libiconv libintl slang glib zlib libssh2 openssl libgcc gcc
Source Code: mc-4.8.13.tar.gz | File info | Developer | Date Created: September 22, 2014
Dependencies:
Source Code: md5-6142000.tar.gz | File info | Developer | Date Created: March 25, 2009
Dependencies: perl
Source Code: | File info | Developer | Date Created: July 27, 2017
You will probably want to run this as root and you may need to edit the first line to point to the perl executable on your system. Memconf requires that you have perl installed on your system.
Dependencies: libgcc gcc python zlib
Source Code: mercurial-4.2.tar.gz | File info | Developer | Date Created: July 31, 2017
Dependencies: libiconv
Source Code: mhash-0.9.9.9.tar.gz | File info | Developer | Date Created: August 7, 2010
libiconv.
Dependencies:
Source Code: mined-2011.17.tar.gz | File info | Developer | Date Created: June 16, 2011
Dependencies: coreutils
Source Code: mktemp-1.7.tar.gz | File info | Developer | Date Created: June 24, 2010
coreutils is required on some systems.
Dependencies: gmp libiconv libintl libuninum tre utf8proc libgcc gcc
Source Code: msort-8.53.tar.gz | File info | Developer | Date Created: August 16, 2013
Dependencies: ncurses
Source Code: multitail-6.2.tar.gz | File info | Developer | Date Created: February 16, 2014
.
Dependencies: zlib libgcc gcc
Source Code: mysql-5.5.27.tar.gz | File info | Developer | Date Created: September 25, 2012
Dependencies: python
Source Code: namebench-1.3.1.tar.gz | File info | Developer | Date Created: July 10, 2010
python
Dependencies: ncurses file libiconv libintl libgcc gcc
Source Code: nano-8.0.tar.gz | File info | Developer | Date Created: May 5, 2024
Dependencies:
Source Code: nc-110.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: ncurses
Source Code: ncdu-1.18.tar.gz | File info | Developer | Date Created: December 7, 2022
Dependencies: gmp libgcc gcc
Source Code: ndiff-2.00.tar.gz | File info | Developer | Date Created: October 25, 2010
gmp and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: ncurses libiconv libintl libgcc gcc
Source Code: ne-2.5.tar.gz | File info | Developer | Date Created: August 9, 2013
Dependencies:
Source Code: nedit-5.7.tar.gz | File info | Developer | Date Created: October 22, 2020
Dependencies: openssl expat zlib libgcc gcc
Source Code: neon-0.29.6.tar.gz | File info | Developer | Date Created: November 11, 2011
Dependencies:
Source Code: nethack-3.4.3.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libpcap openssl pcre libgcc gcc zlib
Source Code: netsnmp-5.9.1.tar.gz | File info | Developer | Date Created: August 1, 2022
The configure options used in this package were ./configure –with-mib-modules=”smux ucd-snmp/diskio mibII/mta_sendmail” –enable-mfd-rewrites –enable-ucd-snmp-compatibility –with-defaults –enable-ipv6 –with-out-mib-modules=”mibII/ipv6″ –without-perl-modules –disable-embedded-perl –prefix=/usr/local. It is important to read the README.solaris file in /usr/local/doc/netsnmp for some details on installation and potential problems with net-snmp and Solaris.
Dependencies:
Source Code: ngrep-1.47.tar.gz | File info | Developer | Date Created: March 16, 2020
Dependencies: libedit libevent libiconv libintl zlib openssl libgcc gcc
Source Code: ntp-4.2.8p11.tar.gz | File info | Developer | Date Created: March 13, 2018
Dependencies: libtool openssl libnet sasl freeradius krb5 db libgcc gcc zlib
Source Code: openldap-2.4.59.tar.gz | File info | Developer | Date Created: July 24, 2021
Dependencies: libtool openssl sasl db libgcc gcc
Source Code: openldap-2.4.59.tar.gz | File info | Developer | Date Created: April 18, 2020
If you are using a version of Solaris 10 older than Solaris 10 5/08 s10x_u5wos_10 (see /etc/release), you may encounter an error message like
libresolv.so.2 (SUNW_2.2.2) +> (version not found)
To fix this, you will need to update to a newer version of Solaris 10 or upgrade the SUNWcsl and SUNWcslr packages.
Dependencies: libtool openssl sasl db libgcc gcc
Source Code: openldap-2.5.11.tar.gz | File info | Developer | Date Created: March 21, 2022
If you are using a version of Solaris 10 older than Solaris 10 5/08 s10x_u5wos_10 (see /etc/release), you may encounter an error message like
libresolv.so.2 (SUNW_2.2.2) +> (version not found)
To fix this, you will need to update to a newer version of Solaris 10 or upgrade the SUNWcsl and SUNWcslr packages.
Dependencies: libtool openssl sasl db libgcc gcc
Source Code: openldap-2.5.13.tar.gz | File info | Developer | Date Created: October 21, 2023
If you are using a version of Solaris 10 older than Solaris 10 5/08 s10x_u5wos_10 (see /etc/release), you may encounter an error message like
libresolv.so.2 (SUNW_2.2.2) +> (version not found)
To fix this, you will need to update to a newer version of Solaris 10 or upgrade the SUNWcsl and SUNWcslr packages.
Dependencies: libtool openssl sasl db libgcc gcc gmp libiconv libintl libnet nettle
Source Code: openldap-2.5.13.tar.gz | File info | Developer | Date Created: October 21, 2023
If you are using a version of Solaris 10 older than Solaris 10 5/08 s10x_u5wos_10 (see /etc/release), you may encounter an error message like
libresolv.so.2 (SUNW_2.2.2) +> (version not found)
To fix this, you will need to update to a newer version of Solaris 10 or upgrade the SUNWcsl and SUNWcslr packages.
Dependencies: libtool openssl sasl db libgcc gcc gmp libiconv libintl libnet nettle
Source Code: openldap-2.5.13.tar.gz | File info | Developer | Date Created: October 21, 2023
If you are using a version of Solaris 10 older than Solaris 10 5/08 s10x_u5wos_10 (see /etc/release), you may encounter an error message like
libresolv.so.2 (SUNW_2.2.2) +> (version not found)
To fix this, you will need to update to a newer version of Solaris 10 or upgrade the SUNWcsl and SUNWcslr packages.
Dependencies: openssl zlib libgcc gcc
Source Code: openssh-9.3p1.tar.gz | File info | Developer | Date Created: March 20, 2023
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases.
You MUST read the OpenSSH installation page for installation details and helpful web sites.
Dependencies: gcc libgcc
Source Code: openssl-1.0.2u.tar.gz | File info | Developer | Date Created: January 21, 2020
Dependencies: libidl glib libiconv libgcc gcc
Source Code: orbit2-2.14.10.tar.gz | File info | Developer | Date Created: May 17, 2008
libidl, glib, libiconv, and the package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.3 or gcc or higher.
Dependencies: expat xft freetype render xrender fontconfig zlib glib libiconv libgcc gcc
Source Code: pango-1.18.2.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: perl
Source Code: parallel-20240822.tar.gz | File info | Developer | Date Created: September 2, 2024
Dependencies:
Source Code: patch-2.7.6.tar.gz | File info | Developer | Date Created: December 7, 2022
Dependencies:
Source Code: patchutils-0.3.4.tar.gz | File info | Developer | Date Created: August 1, 2017
Dependencies:
Source Code: | File info | Developer | Date Created: May 26, 2015
Dependencies: libgcc gcc
Source Code: pdsh-2.26.tar.gz | File info | Developer | Date Created: August 24, 2012
Dependencies: gdbm zlib libgcc
Source Code: perl-5.32.0.tar.gz | File info | Developer | Date Created: December 3, 2020
When you install a new version of perl, make sure you have your perl environment variables like PERL5LIB set properly.
Dependencies: gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff ncurses tcl libxml2 zlib renderproto libgcc gcc
Source Code: pidgin-2.5.5.tar.gz | File info | Developer | Date Created: July 27, 2017
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the ncurses, tcl, and libxml2 packages.
Dependencies:
gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, ncurses, tcl, libxml2, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libgcc gcc
Source Code: pine-4.64.tar.gz | File info | Developer | Date Created: May 17, 2008
Pine requires that either libgcc-3.4.6 or gcc-3.4.6 packages be installed, and if you use openssl, you will need openssl. This package includes several programs. Configuration documentation and other items can be found in /usr/local/doc/pine. From the README file, we have
Among the executables (in /usr/local/bin) are: pine The Pine mailer. Once compiled this should work just fine on your system with no other files than this binary, and no modifications to your system. Optionally you may create two configuration files, /usr/local/lib/pine.conf and /usr/local/lib/pine.info. See the documentation for details. pico The standalone editor similar to the Pine message composer. This is a very simple straight forward text editor. pilot The standalone file system navigator. imapd The IMAP daemon. If you want to run Pine in client/server mode, this is the daemon to run on the server. Installing this requires system privileges and modifications to /etc/services. See doc/tech-notes for more details. (in /usr/local/sbin along with ipop3d and ipop2d) mtest The test IMAP client, an absolutely minimal mail client, useful for debugging. rpload Utility for uploading a local pinerc or address book to an IMAP server. rpdump Utility for downloading a pinerc or address book to the local machine. mailutil Utility for performing various operations on mailboxes, be they local or remote.
Dependencies: libgcc gcc
Source Code: pixman-0.18.2.tar.gz | File info | Developer | Date Created: August 15, 2010
Dependencies: glib libiconv libintl libgcc gcc
Source Code: pkgconfig-0.29.2.tar.gz | File info | Developer | Date Created: December 7, 2022
Dependencies: libiconv libgcc gcc
Source Code: popt-1.19.tar.gz | File info | Developer | Date Created: December 7, 2022
Dependencies: zlib readline libgcc gcc
Source Code: postgresql-9.3.4.tar.gz | File info | Developer | Date Created: March 30, 2014
Postgresql requires a number of configuration steps beyond just installing the package. Make sure also to read the documentation, like the INSTALL file, in the /usr/local/pgsql/doc/pgsql directory. See also the /usr/local/pgsql/doc/html directory.
Dependencies:
Source Code: pstree-2.39.tar.gz | File info | Developer | Date Created: June 10, 2016
Dependencies: a2ps
Source Code: psutils-1.17.tar.gz | File info | Developer | Date Created: February 21, 2012
You may also want to install a2ps.
Dependencies: libgcc gcc
Source Code: pth-2.0.7.tar.gz | File info | Developer | Date Created: June 18, 2011
/usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libpcap libiconv libintl libgcc gcc
Source Code: ptunnel-0.71.tar.gz | File info | Developer | Date Created: July 2, 2010
libpcap, libiconv, libintl, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: glib gtk
Source Code: putty-0.60.tar.gz | File info | Developer | Date Created: August 29, 2009
Dependencies: python
Source Code: pydf-7.tar.gz | File info | Developer | Date Created: April 26, 2009
python. If you want to use some other python, edit the first line of the pydf file in /usr/local/bin. The pydfrc file is installed in /usr/local/etc, but can put your own copy in .pydfrc in your home directory.
Dependencies: python
Source Code: pygments-1.1.1.tar.gz | File info | Developer | Date Created: September 24, 2009
python.
Dependencies: sqlite python libgcc gcc
Source Code: pysqlite-2.4.0.tar.gz | File info | Developer | Date Created: May 17, 2008
sqlite, python, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: libiconv libintl libgcc gcc openssl ncurses readline tcl tk zlib freetype sqlite expat xrender bzip2 db fontconfig libxslt libxml2 libgpgerror tevent
Source Code: python-2.7.13.tar.gz | File info | Developer | Date Created: August 10, 2017
If you have an older version of python and python applications installed, you may need to edit your PYTHONPATH environment variable to include both old and new python directories. Also, some modules or demos may not exist or work with all levels of Solaris.
Dependencies: xft xrender cairo pango pixman expat fontconfig freetype glib libiconv libintl jpeg ncurses libpng tiff readline tcl tk zlib libgcc gcc gcc sed gzip xz coreutils
Source Code: R-2.15.1.tar.gz | File info | Developer | Date Created: July 7, 2012
Certain uses of R also might require that you also install gcc-3.4.6 to obtain the FORTRAN g77 compiler, sed, gzip, and coreutils.
Dependencies: gmp gnutls libiconv libintl nettle libtasn1 libgcc gcc xrender zlib
Source Code: rdesktop-1.9.0.tar.gz | File info | Developer | Date Created: December 9, 2019
Dependencies:
Source Code: render-0.8.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies:
Source Code: renderproto-0.9.3.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libart_lgpl zlib libpng freetype libgcc gcc
Source Code: rrdtool-1.4.3.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: popt libiconv libintl krb5 readline ncurses openssl openldap sasl zlib libgcc gcc
Source Code: samba-3.6.24.tar.gz | File info | Developer | Date Created: January 9, 2015
Dependencies: gmp popt libiconv libintl ncurses openssl openldap zlib libgcc gcc gnutls nettle python tdb tevent
Source Code: samba-4.6.5.tar.gz | File info | Developer | Date Created: June 9, 2017
Dependencies: db libgcc gcc
Source Code: cyrus-sasl-2.1.26.tar.gz | File info | Developer | Date Created: June 4, 2013
******************************************************** * WARNING: * Plugins are being installed into /usr/local/lib/sasl2, * but the library will look for them in /usr/lib/sasl2. * You need to make sure that the plugins will eventually * be in /usr/lib/sasl2 — the easiest way is to make a * symbolic link from /usr/lib/sasl2 to /usr/local/lib/sasl2, * but this may not be appropriate for your site, so this * installation procedure won’t do it for you. * * If you don’t want to do this for some reason, you can * set the location where the library will look for plugins * by setting the environment variable SASL_PATH to the path * the library should use. ********************************************************
Dependencies: pcre libgcc gcc
Source Code: shmux-1.0.3.tar.gz | File info | Developer | Date Created: February 4, 2019
Dependencies: pcre libgcc gcc
Source Code: shush-1.2.3.tar.gz | File info | Developer | Date Created: May 21, 2012
Dependencies: xrender sdl glib gtk libiconv libintl libgcc gcc
Source Code: smpeg-0.4.5.tar.gz | File info | Developer | Date Created: August 20, 2010
xrender, sdl-1.2.14, glib-1.2.10, gtk+-1.2.10, libiconv, libintl, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: ncurses libxml2 zlib libiconv gettext openssl libgcc gcc lynx perl
Source Code: snownews-1.5.12.tar.gz | File info | Developer | Date Created: August 8, 2011
ncurses, libxml2, zlib, libiconv, gettext, openssl, and you need to have libgcc_so.so.1 in /usr/local/lib, so you must have installed either libgcc-3.3 or gcc-3.3 or higher. Snownews will look for the lynx text mode web browser to display pages. If you want to use opml2snow, you will need to have a version of perl on your system and will need to edit the opml2snow perl script to point to the perl you will be using. You may also need to install the XML::LibXML perl module. See the documentation in the /usr/local/doc/snownews directory for details.
Dependencies: readline openssl libgcc gcc
Source Code: socat-1.7.2.4.tar.gz | File info | Developer | Date Created: March 15, 2014
Dependencies: ispell
Source Code: spell-1.1.tar.gz | File info | Developer | Date Created: July 24, 2011
ispell
Dependencies: readline libgcc gcc
Source Code: sqlite-3.14.1.tar.gz | File info | Developer | Date Created: August 17, 2016
Dependencies: file glib libnet openssl openldap serf utf8proc apr aprutil apache expat libiconv libintl sasl sqlite zlib libgcc gcc
Source Code: subversion-1.10.2.tar.gz | File info | Developer | Date Created: August 10, 2018
Dependencies: zlib libgcc gcc
Source Code: swig-1.3.40.tar.gz | File info | Developer | Date Created: October 18, 2010
zlib and having libgcc_s.so.1 and libstdc++.so.6 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6.
Dependencies: libgcc gcc
Source Code: t1lib-5.1.2.tar.gz | File info | Developer | Date Created: May 19, 2010
You will need to have installed libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libiconv libintl libgcc gcc
Source Code: tar-1.34.tar.gz | File info | Developer | Date Created: February 15, 2021
Dependencies: tk libgcc gcc
Source Code: tcl-8.6.3.tar.gz | File info | Developer | Date Created: December 23, 2014
Dependencies:
Source Code: tcpdrop_solaris-20080516.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libdnet libiconv libintl libpcap tcpdump libgcc gcc
Source Code: tcpreplay-3.4.4.tar.gz | File info | Developer | Date Created: September 25, 2010
libdnet, libiconv, libintl, libpcap, tcpdump, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: tcpdump libpcap
Source Code: tcpslice-1.2a3.tar.gz | File info | Developer | Date Created: July 24, 2010
You might need tcpdump and libpcap in order to use tcpslice.
Dependencies: libpcap libiconv libintl libgcc gcc
Source Code: tcpstat-1.5.tar.gz | File info | Developer | Date Created: October 3, 2010
libpcap, libiconv, libintl, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libpcap
Source Code: tcptraceroute-1.5beta7.tar.gz | File info | Developer | Date Created: May 17, 2008
libpcap.
Dependencies:
Source Code: tcputils-0.6.2.tar.gz | File info | Developer | Date Created: November 29, 2010
Dependencies:
Source Code: tcp_wrappers-7.6.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libiconv libgcc gcc
Source Code: tcsh-6.24.05.tar.gz | File info | Developer | Date Created: December 6, 2022
Dependencies: libgcc gcc python
Source Code: tdb-1.3.13.tar.gz | File info | Developer | Date Created: June 9, 2017
Dependencies: ncurses glib libiconv libgcc gcc
Source Code: tdu-20080507.tar.gz | File info | Developer | Date Created: March 27, 2009
ncurses, glib, libiconv, and to obtain /usr/local/lib/libgcc_s.so.1, install either libgcc-3.4.6 or gcc-3.4.6 or later.
Dependencies:
Source Code: ted-0.2.4.tar.gz | File info | Developer | Date Created: January 16, 2010
Dependencies: libgcc gcc python
Source Code: tevent-0.9.31.tar.gz | File info | Developer | Date Created: June 9, 2017
Dependencies: libiconv libintl ncurses libgcc gcc
Source Code: texinfo-7.1.tar.gz | File info | Developer | Date Created: October 23, 2023
Dependencies:
Source Code: thttpd-2.25b.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: jpeg zlib libgcc gcc xz
Source Code: tiff-4.0.3.tar.gz | File info | Developer | Date Created: August 21, 2013
Dependencies: xft tcl xrender expat fontconfig libiconv libintl freetype zlib libgcc gcc
Source Code: tk-8.6.3.tar.gz | File info | Developer | Date Created: December 23, 2014
Dependencies: tcl tk
Source Code: tkinfo-2.8.tar.gz | File info | Developer | Date Created: July 27, 2011
tcl and tk.
Dependencies: libgcc gcc
Source Code: tre-0.8.0.tar.gz | File info | Developer | Date Created: August 16, 2013
Dependencies:
Source Code: tree-1.8.0.tar.gz | File info | Developer | Date Created: May 25, 2019
Dependencies:
Source Code: unclutter-8.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: libgcc gcc
Source Code: uncrustify-0.63.tar.gz | File info | Developer | Date Created: July 11, 2016
Dependencies: libgcc gcc
Source Code: unrar-5.7.5.tar.gz | File info | Developer | Date Created: June 14, 2019
Dependencies: libiconv libgcc gcc
Source Code: unrtf-0.21.10.tar.gz | File info | Developer | Date Created: June 14, 2019
Dependencies:
Source Code: unzip-6.0.tar.gz | File info | Developer | Date Created: September 19, 2009
Dependencies: libiconv ncurses libgcc gcc
Source Code: vile-9.8.tar.gz | File info | Developer | Date Created: August 9, 2010
libiconv, ncurses, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: libpng zlib libgcc gcc
Source Code: visprint-2.1.tar.gz | File info | Developer | Date Created: May 17, 2008
libpng, zlib, and /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: openssl libgcc gcc
Source Code: vsftpd-3.0.2.tar.gz | File info | Developer | Date Created: June 25, 2014
Details on server configuration and examples can be found in the /usr/local/doc/vsftab directory. As with any ftp servers, users should read these documents carefully before putting vsftpd into production.
Dependencies: db expat geoip fontconfig freetype gd libiconv libintl jpeg libpng zlib libgcc gcc
Source Code: webalizer-2.23.05.tar.gz | File info | Developer | Date Created: February 28, 2012
db, expat, geoip, fontconfig, freetype, gd, libiconv, libintl, jpeg, libpng, zlib, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: pcre gmp nettle openssl libiconv libidn libintl libgcrypt libgpgerror libtasn1 zlib gnutls libgcc gcc
Source Code: wget-1.24.5.tar.gz | File info | Developer | Date Created: August 31, 2024
Dependencies: pcre gmp nettle openssl libiconv libidn libintl libgcrypt libgpgerror libtasn1 zlib gnutls libgcc gcc
Source Code: wget-1.24.5.tar.gz | File info | Developer | Date Created: August 31, 2024
Dependencies: gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff pcre aspell zlib renderproto libgcc gcc
Source Code: winefish-1.3.3.tar.gz | File info | Developer | Date Created: May 17, 2008
If you have already installed the gtk+ package and its dependencies, you may only need to install the pcre and aspell packages below. Dependencies:
gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, pcre, aspell, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: openssl geoip lua pixman pcre adns libpcap libgcrypt libtasn1 gnutls krb5 libgpgerror gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto cares libgcc gcc
Source Code: wireshark-1.8.4.tar.gz | File info | Developer | Date Created: December 11, 2012
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will need to install pcre, krb5, libpcap, libgcrypt, gnutls, libgpgerror, cares, and openssl.
Dependencies: libiconv libintl libtasn1 zlib libgpgerror libgcrypt gnutls libgcc gcc
Source Code: wput-0.6.2.tar.gz | File info | Developer | Date Created: June 9, 2009
Dependencies: gtk atk glib pango libiconv xrender cairo render expat fontconfig freetype libpng jpeg tiff zlib renderproto libgcc gcc
Source Code: wxgtk-2.8.6.tar.gz | File info | Developer | Date Created: May 17, 2008
gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages.
Dependencies: zlib libpng jpeg libgcc gcc
Source Code: xfig-3.2.4.tar.gz | File info | Developer | Date Created: April 18, 2007
zlib, libpng, jpeg, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: fontconfig freetype zlib render expat libgcc gcc
Source Code: xft-2.1.2.tar.gz | File info | Developer | Date Created: May 17, 2008
installs in /usr/local. Xft libraries require that fontconfig, freetype, zlib, xrender, render, and expat Having libgcc_s.so.1 in /usr/local/lib is also required. This can be done by installing libgcc-3.3 or gcc-3.3.2 or higher.
Dependencies: expat libgcc gcc
Source Code: xmlparser-2.36.tar.gz | File info | Developer | Date Created: May 17, 2008
expat and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies: bzip2 libiconv libintl readline zlib libgcc gcc
Source Code: xorriso-1.0.8.tar.gz | File info | Developer | Date Created: May 2, 2011
bzip2, libiconv, libintl, readline, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher.
Dependencies:
Source Code: xpm-3.4k.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies:
Source Code: xrender-0.8.3.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies:
Source Code: xtail-2.1.tar.gz | File info | Developer | Date Created: December 7, 2008
Dependencies:
Source Code: xtermcontrol-2.10.tar.gz | File info | Developer | Date Created: October 16, 2009
Dependencies: libatomic_ops gc ncurses libiconv libintl libgcc gcc
Source Code: zile-2.4.15.tar.gz | File info | Developer | Date Created: November 8, 2020
Dependencies:
Source Code: zip-3.0.tar.gz | File info | Developer | Date Created: July 26, 2008
Dependencies: libgcc gcc
Source Code: zlib-1.2.11.tar.gz | File info | Developer | Date Created: February 23, 2017
Dependencies:
Source Code: zoo-2.10.tar.gz | File info | Developer | Date Created: May 17, 2008
Dependencies: ncurses gdbm libiconv libintl libgcc gcc
Source Code: zsh-5.9.tar.gz | File info | Developer | Date Created: November 16, 2022
Dependencies: libgcc gcc
Source Code: zutils-1.9.tar.gz | File info | Developer | Date Created: December 9, 2022