This is to checkout the Notes.
| aalib-1.4.5 | ____|____ |
|
Dependencies: slang and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.3 or gcc-3.3.2 or higher. |
| aalib-1.4.5 | ____|____ |
|
Dependencies: slang and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4 or gcc-3.4.6 or higher. |
| abook-0.5.6 | ____|____ |
|
Dependencies: libiconv, libintl, ncurses, readline, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| abook-0.5.6 | ____|____ |
|
Dependencies: libiconv, libintl, ncurses, readline, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| adns-1.4 | ____|____ |
|
Dependencies: Having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| adns-1.4 | ____|____ |
|
Dependencies: Having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| aide-0.15.1 | ____|____ |
|
Dependencies: zlib, mhash, and libgcc_s.so.1 should be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or later. Aide requires some configuration before use. See the documentation in the /usr/local/doc/aide directory and in the Details link below. A sample aide.conf file is in /usr/local/doc/aide and should be placed in /usr/local/etc. Aide is used to help provide security for systems. Any security problems are your responsibility. See our Disclaimer. |
| aide-0.15.1 | ____|____ |
|
Dependencies: zlib, mhash, and libgcc_s.so.1 should be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or later. Aide requires some configuration before use. See the documentation in the /usr/local/doc/aide directory and in the Details link below. A sample aide.conf file is in /usr/local/doc/aide and should be placed in /usr/local/etc. Aide is used to help provide security for systems. Any security problems are your responsibility. See our Disclaimer. |
| alpine-2.00 | ____|____ |
|
Dependencies: openssl, ncurses, libiconv, openldap, sasl, libintl, and libgcc_s.so.1 should be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or later. |
| alpine-2.00 | ____|____ |
|
Dependencies: openssl, ncurses, libiconv, openldap, sasl, libintl, and libgcc_s.so.1 should be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or later. |
| analog-6.0 | ____|____ |
|
The analog program requires configuration. Information on how to do this is in the various files and directories in /usr/local/analog-6.0. |
| analog-6.0 | ____|____ |
|
The analog program requires configuration. Information on how to do this is in the various files and directories in /usr/local/analog-6.0. |
| apache-1.3.42 | ____|____ |
|
Dependencies: expat, db-4.7.25.NC, and libgcc_s.so.1 must be in /usr/local/lib by installing libgcc-3.4.6 or gcc-3.4.6 or higher. This package does not yet have mod_ssl support as that seems not to have been released for 1.3.42 yet. I have created a detailed document .on how I produced the 1.3.27 package and how you might install it. Most the this applies to 1.3.42. Please read it. It is suggested you back up your current apache files before installing any new apache package. |
| apache-1.3.42 | ____|____ |
|
Dependencies: expat, db-4.7.25.NC, and libgcc_s.so.1 must be in /usr/local/lib by installing libgcc-3.4.6 or gcc-3.4.6 or higher. This package does not yet have mod_ssl support as that seems not to have been released for 1.3.42 yet. I have created a detailed document on how we produced the 1.3.27 package and how you might install it. Most this applies to 1.3.42. Please read it. It is suggested you back up your current apache files before installing any new apache package. |
| apache-2.0.59 | ____|____ |
|
Dependencies: expat, libiconv, gdbm, zlib, db-4.2.52.NC, openssl, and either the libgcc or gcc must be installed. Documentation can be found in /usr/local/apache2/doc/apache2. The configuration files in /usr/local/apache2/conf must be edited to fit your site's needs, including ssl support. The httpd-std.conf there should be copied to httpd.conf and any edits you must make included. Suggested special edits for httpd.conf include changing the line Group #-1 to Group nobody If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost. The configuration step for this package was ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all --enable-ssl=shared --enable-ssl --with-ssl=/usr/local/ssl --enable-proxy --enable-proxy-connect --enable-proxy-ftp --enable-proxy-http The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in openssh.html HELLO where you can determine how to set up the randomness features required when using openssl. |
| apache-2.0.59 | ____|____ |
|
Dependencies: expat, libiconv, gdbm, zlib, db-4.2.52.NC, openssl, and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4 or gcc-3.4.6 or higher packages. Documentation can be found in /usr/local/apache2/doc/apache2. The configuration files in /usr/local/apache2/conf must be edited to fit your site's needs, including ssl support. The httpd-std.conf there should be copied to httpd.conf and any edits you must make included. Suggested special edits for httpd.conf include changing the line Group #-1 to Group nobody If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost. The configuration step for this package was ./configure --prefix=/usr/local/apache2 --enable-mods-shared=all --enable-ssl=shared --enable-ssl --with-ssl=/usr/local/ssl --enable-proxy --enable-proxy-connect --enable-proxy-ftp --enable-proxy-http The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in openssh.html where you can determine how to set up the randomness features required when using openssl. |
| apache-2.2.27 | ____|____ |
|
Documentation can be found in /usr/local/doc/apache. The configuration files in /usr/local/apache2/conf must be edited to fit your site’s needs, including ssl support. If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost.. The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in OpenSSH installation page where you can determine how to set up the randomness features required when using openssl. |
| apache-2.2.32 | ____|____ |
|
Documentation can be found in /usr/local/doc/apache. The configuration files in /usr/local/apache2/conf must be edited to fit your site’s needs, including ssl support. If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost.. The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in OpenSSH installation page where you can determine how to set up the randomness features required when using openssl. |
| apache-2.4.39 | ____|____ |
|
Documentation can be found in /usr/local/doc/apache. The configuration files in /usr/local/apache2/conf must be edited to fit your site’s needs, including ssl support. If you have already been using apache2, MAKE SURE that you backup any files in the conf, htdocs, modules, or other subdirectories of /usr/local/apache2 where you might have changed or added files so that installing the updated apache2 will not cause your configuration or other files to be lost. The configuration step for this package was ./configure –prefix=/usr/local/apache2 –enable-mods-shared=all –enable-ssl=shared –enable-ssl –with-ssl=/usr/local/ssl –enable-proxy –enable-proxy-connect –enable-proxy-ftp –enable-proxy-http –with-ldap –enable-ldap –enable-authnz-ldap. The modules that were compiled with this package can be found in /usr/local/apache2/modules. You may also need to set up startup scripts to begin the httpd processes at boot up. See the appropriate link for your level of Solaris in OpenSSH installation page where you can determine how to set up the randomness features required when using openssl. |
| apachetop-0.12.5 | ____|____ |
|
Apachetop requires that readline, ncurses, and pcre be installed, and to obtain the needed /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 files, you should install either libgcc-3.3 or gcc-3.3.2 or higher. |
| apachetop-0.12.5 | ____|____ |
|
Apachetop requires that readline, ncurses, and pcre be installed, and to obtain the needed /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 files, you should install either libgcc-3.4 or gcc-3.4.6 or higher. |
| argtable2-13 | ____|____ |
|
Dependencies: libgcc_s.so.1 needs to be in /usr/local/lib. This can be done by installing gcc-3.4.6 or libgcc-3.4.6 or higher. |
| argtable2-13 | ____|____ |
|
Dependencies: libiconv and libgcc_s.so.1 needs to be in /usr/local/lib. This can be done by installing gcc-3.4.6 or libgcc-3.4.6 or higher. |
| arpalert-2.0.11 | ____|____ |
|
Dependencies: libpcap, libiconv, libintl, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| arpalert-2.0.11 | ____|____ |
|
Dependencies: libpcap, libiconv, libintl, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| arpwatch-2.1a15 | ____|____ |
|
See the /usr/local/doc/arpwatch directory for detailed use information and some useful scripts. |
| aspell-0.60.6.1 | ____|____ |
|
Dependencies: ncurses, libiconv, and having libstdc++.so.6 and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. Aspell also needs to have some dictionaries installed. You will need to study the README in /usr/local/doc/aspell to find out how to get the dictionaries you want and install them - AFTER you install aspell. |
| aspell-0.60.6.1 | ____|____ |
|
Dependencies: ncurses, libiconv, and having libstdc++.so.6 and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. Aspell also needs to have some dictionaries installed. You will need to study the README in /usr/local/doc/aspell to find out how to get the dictionaries you want and install them - AFTER you install aspell. |
| automake-1.13.3 | ____|____ |
|
Parts of automake may require that you have perl installed also. |
| automake-1.13.3 | ____|____ |
|
Some parts of automake make require perl, but not all. |
| axel-2.4 | ____|____ |
|
Dependencies: libiconv, libintl and get /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| axel-2.4 | ____|____ |
|
Dependencies: libiconv, libintl and get /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| bash-3.2.17 | ____|____ |
|
Dependencies: libiconv and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. This version of bash contains 17 patches that fix a number of problems. |
| bash-3.2.17 | ____|____ |
|
Dependencies: libiconv and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. This version of bash contains 17 patches that fix a number of problems. |
| bash-4.3.30 | ____|____ |
|
This bash package has the 4.3 level 30 patches to fix a vulnerability. |
| bashdb-4.0_0.4 | ____|____ |
|
This is for use with Bash 4.x. |
| bash_nonetredirections-4.0 | ____|____ |
|
This bash package was built with --disable-net-redirections to satisfy security issues raised by some system administrators. Dependencies: libiconv, libintl, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| bash_nonetredirections-4.0 | ____|____ |
|
Dependencies: libiconv, libintl, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| bb-1.3.0 | ____|____ |
|
Dependencies: aalib, slang, libmikmod, and requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.3 or gcc or higher. |
| bb-1.3.0 | ____|____ |
|
Dependencies: aalib, slang, libmikmod, and requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4 or gcc or higher. |
| bcrypt-1.1 | ____|____ |
|
By default, bcrypt will compress input files before encryption, remove input files after they are processed (assuming they are processed successfully) and overwrite input files with random data to prevent data recovery. If you use bcrypt make sure you have read the /usr/local/doc/bcrypt/README file and do man bcrypt. If you bcrypt a file and then forget your pass phrase, you won’t get it back. There are options to bcrypt so that the original file is not deleted. |
| bcrypt-1.1 | ____|____ |
|
By default, bcrypt will compress input files before encryption, remove input files after they are processed (assuming they are processed successfully) and overwrite input files with random data to prevent data recovery. If you use bcrypt make sure you have read the /usr/local/doc/bcrypt/README file and do man bcrypt. If you bcrypt a file and then forget your pass phrase, you won’t get it back. There are options to bcrypt so that the original file is not deleted. |
| bglibs-1.104 | ____|____ |
|
Dependencies: Having libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| bglibs-1.104 | ____|____ |
|
Dependencies: Having libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| bind-8.4.6 | ____|____ |