This is to checkout the Notes.
| gnats-4.1.0 | ____|____ |
|
You will need to read the /usr/local/doc/gnats/INSTALL file and other files there, which tell you about the need for a gnats user and other installation requirements. |
| gnats-4.1.0 | ____|____ |
|
You will need to read the /usr/local/doc/gnats/INSTALL file and other files there, which tell you about the need for a gnats user and other installation requirements. |
| gnuit-4.9.4 | ____|____ |
|
Dependencies: ncurses. |
| gnuit-4.9.4 | ____|____ |
|
Dependencies: ncurses, libiconv, and you need to have libgcc_so.so.1 in /usr/local/lib, so you must have installed either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gnuplot-4.6.0 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the gd, readline, and wxgtk packages. Some users have found that gnuplot will core dump for certain terminal types. To avoid this problem, setting the terminal type will set terminal x11 at the gnuplot prompt with fix this. |
| gnuplot-4.6.0 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the gd, readline, and wxgtk packages. Some users have found that gnuplot will core dump for certain terminal types. To avoid this problem, setting the terminal type with set terminal x11 at the gnuplot prompt will fix this. |
| gnutls-2.8.6 | ____|____ |
|
Dependencies: libiconv, libintl, libtasn1, ncurses, readline, zlib, libgcrypt, libgpgerror, and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4 or gcc-3.4.6 or higher packages. |
| gnutls-2.8.6 | ____|____ |
|
Dependencies: libiconv, libintl, libtasn1, ncurses, readline, zlib, libgcrypt, libgpgerror, and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4 or gcc-3.4.6 or higher packages. |
| gpa-0.7.6 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the gpgme and libgpgerror packages. |
| gpa-0.7.6 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the gpgme and libgpgerror packages. Dependencies: libgpgerror, gpgme, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| gperf-3.0.4 | ____|____ |
|
Dependencies: /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gperf-3.0.4 | ____|____ |
|
Dependencies: /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gqlplus-1.12 | ____|____ |
|
Dependencies: ncurses. |
| gqlplus-1.12 | ____|____ |
|
Dependencies: ncurses. |
| groff-1.21 | ____|____ |
|
Dependencies: libiconv and you may need to install either the libgcc-3.4.6 or the gcc-3.4.6 or higher packages. The psutils package might also be needed for some groff uses. |
| groff-1.21 | ____|____ |
|
Dependencies: libiconv and you may need to install either the libgcc-3.4.6 or the gcc-3.4.6 or higher packages. The psutils package might also be needed for some groff uses. |
| grsync-0.6.1 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, all the Dependencies below should be installed already except rsync and popt (see the rsync dependencies). |
| grsync-0.6.1 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, all the Dependencies below should be installed already except rsync and popt (see the rsync dependencies). Dependencies: rsync, gtk+, atk, glib, pango, libiconv, libintl, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| gsl-1.14 | ____|____ |
|
Dependencies: /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gsl-1.14 | ____|____ |
|
Dependencies: /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gt5-1.4.0 | ____|____ |
|
You will want to install the links text browser which helps desplay the results of gt5. |
| gt5-1.4.0 | ____|____ |
|
You will want to install the links text browser which helps desplay the results of gt5. |
| gtk-1.2.10 | ____|____ |
|
You must also install the glib-1.2.10 package. |
| gtk-1.2.10 | ____|____ |
|
You must also install the glib-1.2.10 package. |
| gtk-2.12.0 | ____|____ |
|
See the Dependencies for these packages which may include yet more packages you may need for development work. Once you install the gtk and other dependency packages, it is important that you test gtk+. This can be done by running the gtk-demo program and seeing if the various examples work. Generally, the gtk-demo, and other programs you build with gtk+, will only work if your font cache is set up properly. This is done by editing the /usr/local/etc/fonts/fonts.conf file so that the font directory list is something like <,dir>,/usr/share/fonts<,/dir>, <,dir>,/usr/openwin/lib/X11/fonts<,/dir>, <,dir>,~/.fonts<,/dir>, (this may vary depending on what level of Solaris you are using and how many fonts you want to include.) Then, you must run /usr/local/bin/fc-cache -f -v as root, which can take many hours, but when it finishes will give you a succeeded message. |
| gtk-2.12.0 | ____|____ |
|
Dependencies: atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages. See the Dependencies for these packages which may include yet more packages you may need for development work. Once you install the gtk and other dependency packages, it is important that you test gtk+. This can be done by running the gtk-demo program and seeing if the various examples work. Generally, the gtk-demo, and other programs you build with gtk+, will only work if your font cache is set up properly. This is done by editing the /usr/local/etc/fonts/fonts.conf file so that the font directory list is something like <,dir>,/usr/share/fonts<,/dir>, <,dir>,/usr/openwin/lib/X11/fonts<,/dir>, <,dir>,~/.fonts<,/dir>, (this may vary depending on what level of Solaris you are using and how many fonts you want to include.) Then, you must run /usr/local/bin/fc-cache -f -v as root, which can take many hours, but when it finishes will give you a succeeded message. |
| gtkspell-2.0.11 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the aspell package. |
| gtkspell-2.0.11 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the aspell package. Dependencies: aspell, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| gtypist-2.8.5 | ____|____ |
|
Dependencies: libiconv, libintl, ncurses, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gtypist-2.8.5 | ____|____ |
|
Dependencies: libiconv, libintl, ncurses, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| gv-3.5.8 | ____|____ |
|
Requires the installation of #ghostscript">ghostscript. The xaw3d Athena 3D widget libraries may also be required. |
| gv-3.5.8 | ____|____ |
|
Requires the installation of ghostscript. The xaw3d Athena 3D widget libraries may also be required |
| hping3-20051105 | ____|____ |
|
Dependencies: tcl and to obtain /usr/local/lib/libgcc_s.so.1 you will need to have installed libgcc-3.4.6 or gcc-3.4.6 or higher. |
| hping3-20051105 | ____|____ |
|
Dependencies: tcl and to obtain /usr/local/lib/libgcc_s.so.1 you will need to have installed libgcc-3.4.6 or gcc-3.4.6 or higher. |
| htdig-3.2.0b5 | ____|____ |
|
The zlib and either the gcc or libgcc packages need to be installed in order to use this package. |
| htdig-3.2.0b5 | ____|____ |
|
The zlib and either the gcc or libgcc packages need to be installed in order to use this package. |
| hydra-2.6 | ____|____ |
|
The hydra package requires that you have the openssl-0.9.7g and either the libgcc or gcc packages installed. Make sure to read the hydra README file in /usr/local/doc/hydra for legal issue comments. |
| hydra-2.6 | ____|____ |
|
The hydra package requires that you have the openssl-0.9.7g and either the libgcc or gcc packages installed. Make sure to read the hydra README file in /usr/local/doc/hydra for legal issue comments. |
| hypermail-2.3.0 | ____|____ |
|
Dependencies: gdbm, pcre, libiconv, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| hypermail-2.3.0 | ____|____ |
|
Dependencies: gdbm, pcre, libiconv, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| id3lib-3.8.3 | ____|____ |
|
Dependencies: zlib, libiconv, and libgcc_s.so.1 and libstdc++.so.6 need to be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| id3lib-3.8.3 | ____|____ |
|
Dependencies: zlib, libiconv, and libgcc_s.so.1 and libstdc++.so.6 need to be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| imagemagick-6.6.0.10 | ____|____ |
|
Dependencies: xrender-0.8.3, bzip2-1.0.6, cairo-1.4.10, libcroco-0.6.1, expat-2.0.1, fontconfig-2.2.0, freetype-2.2.1, glib-2.25.13, gtk-2.2.4, librsvg-2.18.2, libiconv-1.14, libintl-3.4.0, libtool, libgsf-1.14.7, jpeg-8a, libpng-1.2.44, pango-1.18.2, lcms-1.19, tiff-3.9.5, libxml2-2.7.8, zlib-1.2.5, and to have libgcc_s.so.1 in /usr/local/lib, install libgcc-3.4.6, gcc-3.4.6 or higher. |
| imagemagick-6.6.0.10 | ____|____ |
|
Dependencies: xrender-0.8.3, bzip2-1.0.6, cairo-1.4.10, libcroco-0.6.1, expat-2.0.1, fontconfig-2.2.0, freetype-2.2.1, glib-2.25.13, gtk-2.2.4, librsvg-2.18.2, libiconv-1.14, libintl-3.4.0, libtool, libgsf-1.14.7, jpeg-8a, libpng-1.2.44, pango-1.18.2, lcms-1.19, tiff-3.9.5, libxml2-2.7.8, zlib-1.2.5, and to have libgcc_s.so.1 in /usr/local/lib, install libgcc-3.4.6, gcc-3.4.6 or higher. |
| imaging-1.1.7 | ____|____ |
|
Dependencies: python, xft, xrender, expat, fontconfig, freetype, libiconv, libintl, jpeg, lcms, tcl, tk, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| imaging-1.1.7 | ____|____ |
|
Dependencies: python, xft, xrender, expat, fontconfig, freetype, libiconv, libintl, jpeg, lcms, tcl, tk, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| imap-2007f | ____|____ |
|
Setup documentation is in /usr/local/doc/imap. |
| imap-2007f | ____|____ |
|
Setup documentation is in /usr/local/doc/imap. |
| imlib-1.9.15 | ____|____ |
|
Imlib does not use GTK2, but only GTK1. |
| imlib-1.9.15 | ____|____ |
|
Dependencies: libungif, gtk+, glib, libpng, jpeg, tiff, zlib, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| imlib2-1.4.4 | ____|____ |
|
Dependencies: bzip2, freetype, jpeg, libpng, tiff, libungif, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| imlib2-1.4.4 | ____|____ |
|
Dependencies: bzip2, freetype, jpeg, libpng, tiff, libungif, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| indent-2.2.10 | ____|____ |
|
Dependencies: libiconv and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.3 or gcc-3.3.2 or higher packages. |
| indent-2.2.10 | ____|____ |
|
Dependencies: libiconv and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4 or gcc-3.4.6 or higher packages. |
| iperf-2.0.5 | ____|____ |
|
Dependencies: having libstdc++.so.6 and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| iperf-2.0.5 | ____|____ |
|
Dependencies: libiconv and having libstdc++.so.6 and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| iplog-2.2.3 | ____|____ |
|
The iplog --help command does not work in this version. |
| irssi-0.8.15 | ____|____ |
|
Dependencies: openssl, libiconv, libintl, ncurses, glib, and to get /usr/local/lib/libgcc_s.so.1, you need to install either libgcc-3.4.6 or gcc-3.4.6 or the equivalent. |
| irssi-0.8.15 | ____|____ |
|
Dependencies: openssl, libiconv, libintl, ncurses, glib, and to get /usr/local/lib/libgcc_s.so.1, you need to install either libgcc-3.4.6 or gcc-3.4.6 or the equivalent. |
| ispell-3.3.02 | ____|____ |
|
Dependencies: ncurses |
| ispell-3.3.02 | ____|____ |
|
Dependencies: ncurses |
| joe-3.7 | ____|____ |
|
Dependencies: ncurses. To use some of joe's abilities, make sure to read the documentation in /usr/local/doc/joe which refers to files found in /usr/local/etc/joe. |
| joe-3.7 | ____|____ |
|
Dependencies: ncurses, libiconv, and the package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. To use some of joe's abilities, make sure to read the documentation in /usr/local/doc/joe which refers to files found in /usr/local/etc/joe. |
| john-1.7.6 | ____|____ |
|
Documentation is in /usr/local/doc/john. Its primary purpose is to detect weak Unix passwords. John is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. |
| jpeg-8d | ____|____ |
|
Dependencies: The package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. This package also contains the jpeg-6b and jpeg-7 libraries to provide compatibility with the previous packages. |