This is to checkout the Notes.
| mktemp-1.7 | ____|____ |
|
Dependencies: coreutils, libiconv, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or later. |
| mm-1.4.2 | ____|____ |
|
Dependencies: libgcc-3.4.6 or gcc-3.4.6. |
| mm-1.4.2 | ____|____ |
|
Dependencies: libgcc-3.4.6 or gcc-3.4.6. |
| mpack-1.6 | ____|____ |
|
Dependencies: libiconv, and having libgcc_s.so.1 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| mpfr-2.4.0 | ____|____ |
|
Dependencies: gmp and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| mpfr-2.4.0 | ____|____ |
|
Dependencies: gmp, libiconv, and you may need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| mrtg-2.17.4 | ____|____ |
|
The mrtg executable is a perl program and so you need to have perl installed. If you already have perl, check the first line of the mrtg and related programs to make sure it points to the perl you are using. |
| mrtg-2.17.4 | ____|____ |
|
The mrtg executable is a perl program and so you need to have perl installed. If you already have perl, check the first line of the mrtg and related programs to make sure it points to the perl you are using. |
| mrxvt-0.5.4 | ____|____ |
|
Dependencies: xft, xrender, expat, fontconfig, freetype, libiconv, zlib, libpng, jpeg, and to get /usr/local/lib/libgcc_s.so.1 install libgcc-3.4.6 or gcc-3.4.6 or similar. |
| mrxvt-0.5.4 | ____|____ |
|
Dependencies: xft, xrender, expat, fontconfig, freetype, libiconv, zlib, libpng, jpeg, and to get /usr/local/lib/libgcc_s.so.1 install libgcc-3.4.6 or gcc-3.4.6 or similar. |
| mutt-1.5.21 | ____|____ |
|
Dependencies: openssl, libiconv, libintl, sasl, zlib, libidn, slang, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or later. |
| mutt-1.5.21 | ____|____ |
|
Dependencies: openssl, libiconv, libintl, sasl, zlib, libidn, slang, and to have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or later. |
| namebench-1.3.1 | ____|____ |
|
Dependencies: python |
| namebench-1.3.1 | ____|____ |
|
Dependencies: python |
| ncftp-3.2.5 | ____|____ |
|
Dependences: ncurses |
| ncftp-3.2.5 | ____|____ |
|
Dependencies: ncurses |
| ndiff-2.00 | ____|____ |
|
Dependencies: gmp and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| ndiff-2.00 | ____|____ |
|
Dependencies: gmp and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| neon-0.25.5 | ____|____ |
|
Dependencies: openssl, expat-2.0.1, zlib-1.2.5, and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages. |
| neon-0.25.5 | ____|____ |
|
Dependencies: openssl, expat-2.0.1, libiconv, zlib-1.2.5, and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages. |
| neon-0.29.6 | ____|____ |
|
Dependencies: openssl, expat-2.0.1, zlib-1.2.5, and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages. |
| neon-0.29.6 | ____|____ |
|
Dependencies: openssl, expat-2.0.1, libiconv, zlib-1.2.5, and you will need /usr/local/lib/libgcc_s.so.1 either from the libgcc-3.4.6 or gcc-3.4.6 packages. |
| nepim-0.39 | ____|____ |
|
Dependencies: liboop and having libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| nepim-0.39 | ____|____ |
|
Dependencies: liboop and having libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| netio-1.31 | ____|____ |
|
To find out more about how to use netio, read the /usr/local/doc/netio/netio.doc file and just type netio for options. |
| netio-1.31 | ____|____ |
|
To find out more about how to use netio, read the /usr/local/doc/netio/netio.doc file and just type netio for options. |
| netpbm-10.58.00 | ____|____ |
|
You may need to add /usr/local/netpbm/bin in your PATH, /usr/local/netpbm/lib in your library path, and /usr/local/netpbm/man in your MANPATH. |
| netpbm-10.58.00 | ____|____ |
|
Some of the programs are perl scripts and may need to be edited to point to the perl executable on your system. You may need to add /usr/local/netpbm/bin in your PATH, /usr/local/netpbm/lib in your library path, and /usr/local/netpbm/man in your MANPATH. |
| netsnmp-5.7.2 | ____|____ |
|
The configure options used in this package were ./configure –with-mib-modules=”smux ucd-snmp/diskio mibII/mta_sendmail” –enable-mfd-rewrites –enable-ucd-snmp-compatibility –with-defaults –enable-ipv6 –with-out-mib-modules=”mibII/ipv6″ –without-perl-modules –disable-embedded-perl –prefix=/usr/local. It is important to read the README.solaris file in /usr/local/doc/netsnmp for some details on installation and potential problems with net-snmp and Solaris. |
| netsnmp-5.7.2 | ____|____ |
|
The configure options used in this package were ./configure –with-mib-modules=”smux ucd-snmp/diskio mibII/mta_sendmail” –enable-mfd-rewrites –enable-ucd-snmp-compatibility –with-defaults –enable-ipv6 –with-out-mib-modules=”mibII/ipv6″ –without-perl-modules –disable-embedded-perl –prefix=/usr/local. It is important to read the README.solaris file in /usr/local/doc/netsnmp for some details on installation and potential problems with net-snmp and Solaris. |
| nginx-0.8.54 | ____|____ |
|
Dependencies: pcre, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| nginx-0.8.54 | ____|____ |
|
Dependencies: pcre, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| nikto-1.32 | ____|____ |
|
It can be used by the nessus program. The nikto.pl Perl script goes in /usr/local/bin and is configured to find its config.txt file in /usr/local/nikto. The config.txt file points to the plugins directory in /usr/local/nikto. The documentation is in the /usr/local/doc/nikto/docs/ subdirectory. nikto.pl looks for perl in /usr/local/bin, but can be edited to point to a different perl. |
| nikto-1.32 | ____|____ |
|
It can be used by the nessus program. The nikto.pl Perl script goes in /usr/local/bin and is configured to find its config.txt file in /usr/local/nikto. The config.txt file points to the plugins directory in /usr/local/nikto. The documentation is in the /usr/local/doc/nikto/docs/ subdirectory. nikto.pl looks for perl in /usr/local/bin, but can be edited to point to a different perl. |
| nmap-3.93 | ____|____ |
|
nmap and the nmap front end, nmapfe, require the installation of glib, gtk, openssl-0.9.7g, and either libgcc-3.3 or gcc-3.3.2. Note that this version of the nmap package was compiled with gcc-3.3.2 and so uses the library libstdc++.so.5. If you have installed a version of gcc-3.4.x, you may not have this. The libgcc-3.3 package has the libstdc++.so.5 related files and so needs to be installed or at least you can get the libstdc file from it. |
| nmap-3.93 | ____|____ |
|
nmap and the nmap front end, nmapfe, require the installation of glib, gtk, openssl-0.9.7g, and either libgcc-3.4 or gcc-3.4.6. Note that this version of the nmap package was compiled with gcc-3.4.6 and so uses the library libstdc++.so.5. If you have installed a version of gcc-3.4.x, you may not have this. The libgcc-3.4 package has the libstdc++.so.5 related files and so needs to be installed or at least you can get the libstdc++ file from it. |
| nmap-4.76 | ____|____ |
|
Dependencies: openssl, pygtk, pysqlite, and its dependencies, and you will need /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| nmap-4.76 | ____|____ |
|
Dependencies: openssl, libiconv, pygtk, pysqlite, and its dependencies, and you will need /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| nmap-4.85BETA7 | ____|____ |
|
Dependencies: libpcap, openssl, pygtk, pysqlite, and its dependencies, and you will need /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| nmap-4.85BETA7 | ____|____ |
|
Dependencies: libiconv, openssl, pygtk, pysqlite, and its dependencies, and you will need /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 either from the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| nmap-6.00 | ____|____ |
|
This version is Command Line Only. Use one of the Version 4.x packages if you need the Zenmap front end. |
| nmap-6.25 | ____|____ |
|
This version is Command Line Only. Use one of the Version 4.x packages if you need the Zenmap front end. |
| nose-0.10.4 | ____|____ |
|
Dependencies: python |
| nose-0.10.4 | ____|____ |
|
Dependencies: python |
| ntop-3.3 | ____|____ |
|
Dependencies: apache-2.0.59, libart_lgpl, openssl, freetype, gdbm, libiconv, libpng, libxml2, netsnmp, lpcap_shared, pcre, rrdtool, zlib, and because libgcc_s.so.1 is needed, you must install either libgcc-3.4.6 or gcc-3.4.6. |
| ntop-3.3 | ____|____ |
|
Dependencies: apache-2.0.59, libart_lgpl, openssl, freetype, gdbm, libiconv, libpng, glib-1.2.10, libxml2, netsnmp, libpcap, pcre, rrdtool, zlib, and because libgcc_s.so.1 is needed, you must install either libgcc-3.4.6 or gcc-3.4.6. |
| nzbget-0.6.0 | ____|____ |
|
Dependencies: openssl, libiconv, ncurses, libpar2, libsigc++, libxml2, zlib, libgcrypt, libgpgerror, and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| nzbget-0.6.0 | ____|____ |
|
Dependencies: openssl, libiconv, ncurses, libpar2, libsigc++, libxml2, zlib, libgcrypt, libgpgerror, and libgcc_s.so.1 in /usr/local/lib. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| ocaml-3.10.2 | ____|____ |
|
Dependencies: To have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or later. This version was built with "make world.opt". |