This is to checkout the Notes.
| ocaml-3.10.2 | ____|____ |
|
Dependencies: To have /usr/local/lib/libgcc_s.so.1 install either the libgcc-3.4.6 or gcc-3.4.6 or later. This version was built with "make world.opt". |
| octave-2.1.73 | ____|____ |
|
Dependencies: gnuplot, ncurses, readline, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, install either the libgcc-3.4.6 or gcc-3.4.6 or higher. If you do not install the full gcc package, then you also will need the libg2c-3 package to obtain the libg2c libraries. |
| octave-2.1.73 | ____|____ |
| op-1.32 | ____|____ |
|
Configuration files go into /etc. See documentation in /usr/local/doc/op for details on setup and permissions. |
| op-1.32 | ____|____ |
|
Configuration files go into /etc. See documentation in /usr/local/doc/op for details on setup and permissions. |
| openslp-1.2.1 | ____|____ |
|
Dependencies: openssl and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| openslp-1.2.1 | ____|____ |
|
Dependencies: openssl and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| openssh-6.6p1 | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. You MUST read the OpenSSH installation page for installation details and helpful web sites. |
| openssh-6.7p1 | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. You MUST read the OpenSSH installation page for installation details and helpful web sites. |
| openssh-6.8p1 | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. You MUST read the OpenSSH installation page for installation details and helpful web sites. |
| openssh-7.4p1 | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. You MUST read the OpenSSH installation page for installation details and helpful web sites. |
| openssl-0.9.6i | ____|____ |
|
This version of 0.9.6i includes the Klima-Pokorny-Rosa attack on RSA in SSL/TLS and Timing-based attacks on RSA keys patches. The configure option used for making openssl was solaris-x86-gcc shared. openssl is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. |
| openssl-0.9.6i | ____|____ |
|
openssl is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. The configure option used for making openssl was solaris-sparcv7-gcc shared. |
| openssl-0.9.7g | ____|____ |
|
The configure option used for making openssl was solaris-x86-gcc shared. You may also need to install either gcc-3.3.2 or libgcc-3.3 to obtain the libgcc_s.so.1 library. openssl is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. |
| openssl-0.9.7g | ____|____ |
|
You may also need to install either gcc-3.4.6 or libgcc-3.4 to obtain the libgcc_s.so.1 library. openssl is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. The configure option used for making openssl was solaris-sparcv7-gcc shared. |
| openssl-0.9.8zh | ____|____ |
|
Openssl is often used to make machines more secure. Make sure you know what you are doing. Any security problems are your responsibility. See our Disclaimer. |
| openssl-1.0.0l | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. |
| openssl-1.0.0t | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. |
| openssl-1.0.1g | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh may not be compatible with the new openssl in some cases. |
| openssl-1.0.1t | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh will not be compatible with the new openssl in most cases. |
| openssl-1.0.2k | ____|____ |
|
When you update openssl to a more recent version, you may need to update openssh if you use that. Typically, when openssl is updated, openssh is rebuilt to use the latest openssl. An older build of openssh may not be compatible with the new openssl in some cases. |
| optik-1.5.3 | ____|____ |
|
Dependencies: python |
| optik-1.5.3 | ____|____ |
|
Dependencies: python |
| orbit2-2.14.10 | ____|____ |
|
Dependencies: libidl, glib, libiconv, and the package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.3 or gcc or higher. |
| orbit2-2.14.10 | ____|____ |
|
Dependencies: libidl, glib, libiconv, and the package requires that libgcc_s.so.1 be in /usr/local/lib. This can be done by installing libgcc-3.4 or gcc or higher. |
| p7zip-9.20.1 | ____|____ |
|
Dependencies: libgcc-3.4.6 or gcc-3.4.6 packages to that /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 are available. |
| p7zip-9.20.1 | ____|____ |
|
Dependencies: libgcc-3.4.6 or gcc-3.4.6 packages to that /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6 are available. |
| paps-0.6.8 | ____|____ |
|
Dependencies: expat, fontconfig, freetype, glib, libiconv, libintl, pango, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| paps-0.6.8 | ____|____ |
|
Dependencies: expat, fontconfig, freetype, glib, libiconv, libintl, pango, zlib, and /usr/local/lib must contain libgcc_s.so.1 and libstdc++so.6 from either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| paramiko-1.7.1 | ____|____ |
|
Dependencies: python-2.6.2 and pycrypto. |
| paramiko-1.7.1 | ____|____ |
|
Dependencies: python-2.6.2 and pycrypto. |
| patool-0.13 | ____|____ |
|
Dependencies: python |
| patool-0.13 | ____|____ |
|
Dependencies: python |
| pconsole-1.0 | ____|____ |
|
Dependencies: libiconv and having libgcc_s.so.1 and libstdc++.so.6 in /usr/local/lib is required. This can be done by installing libgcc-3.4.6 or gcc-3.4.6 or higher. |
| pdftk-1.12 | ____|____ |
|
Dependencies are: /usr/local/lib/libiconv.so.2 from libiconv, /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 from either libgcc-3.4 or gcc-3.4.6 or other compatible gcc versions, and libgcj-3.4-sol9-sparc-local.gz |
| pdftk-1.12 | ____|____ |
|
Dependencies are: /usr/local/lib/libiconv.so.2 from libiconv, /usr/local/lib/libstdc++.so.5 and /usr/local/lib/libgcc_s.so.1 from either libgcc-3.3 or gcc-3.3.2 or other compatible gcc versions, libgcj-3.4-sol9-x86-local.gz |
| perl-5.12.3 | ____|____ |
|
When you install a new version of perl, make sure you have your perl environment variables like PERL5LIB set properly. |
| perl-5.18.1 | ____|____ |
|
Dependencies: gdbm. When you install a new version of perl, make sure you have your perl environment variables like PERL5LIB set properly. |
| perl-5.8.8 | ____|____ |
|
Important Note - Solaris 9 comes with a slightly earlier version of perl in /usr/bin. You may wish to use this version rather than the version on sunfreeware.com. If you do install this perl and want to use it rather than the Sun one, you will need to have /usr/local/bin in your PATH before /usr/bin. |
| perl-5.8.8 | ____|____ |
|
Important Note - Solaris 9 comes with a slightly earlier version of perl in /usr/bin. You may wish to use this version rather than the version on sunfreeware.com. If you do install this perl and want to use it rather than the Sun one, you will need to have /usr/local/bin in your PATH before /usr/bin. |
| php-4.4.5 | ____|____ |
|
Php requries that either libgcc-3.4 or gcc be installed. PHP is used with apache 2.0.59, not apache 2.2, and mysql which should also be installed along with any packages they may require. PHP needs configuration. php.ini related files are in /usr/local/php4/doc/php4 along with other documentation. php.ini needs to be installed in /usr/local/php4/lib. The libphp4.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php4_module modules/libphp4.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. |
| php-4.4.5 | ____|____ |
|
Php requries that either libgcc-3.3 or gcc be installed. PHP is used with apache 2.0.59, not apache 2.2, and mysql which should also be installed along with any packages they may require. PHP needs configuration. php.ini related files are in /usr/local/php4/doc/php4 along with other documentation. php.ini needs to be installed in /usr/local/php4/lib. The libphp4.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php4_module modules/libphp4.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. |
| php-5.2.1 | ____|____ |
|
PHP requires that libiconv. libxml2, zlib, and either libgcc-3.4.6 or gcc-3.4.6 be installed. PHP is used with apache 2.0.59, not apache 2.2, and mysql which should also be installed along with any packages they may require. PHP needs configuration. php.ini related files are in /usr/local/php/doc/php along with other documentation. php.ini needs to be installed in /usr/local/php/lib. The libphp5.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php5_module modules/libphp5.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. Finally, you will need to have /usr/local/lib and /usr/local/pgsql/lib before /usr/lib in your library search path like LD_LIBRARY_PATH or similar. |
| php-5.2.1 | ____|____ |
|
PHP requires that libiconv. libxml2, zlib, and either libgcc-3.4.6 or gcc-3.4.6 be installed. PHP is used with apache 2.0.59, not apache 2.2, and mysql which should also be installed along with any packages they may require. PHP needs configuration. php.ini related files are in /usr/local/php/doc/php along with other documentation. php.ini needs to be installed in /usr/local/php/lib. The libphp5.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php5_module modules/libphp5.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. Finally, you will need to have /usr/local/lib and /usr/local/pgsql/lib before /usr/lib in your library search path like LD_LIBRARY_PATH or similar. |
| php-5.3.16 | ____|____ |
|
PHP needs configuration. php.ini related files are in /usr/local/php/doc/php along with other documentation. php.ini needs to be installed in /usr/local/php/lib. The libphp5.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php5_module modules/libphp5.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. |
| php-5.4.37 | ____|____ |
|
PHP needs configuration. php.ini related files are in /usr/local/php/doc/php along with other documentation. php.ini needs to be installed in /usr/local/php/lib. The libphp5.so file is installed in /usr/local/apache2/modules. The following two lines LoadModule php5_module modules/libphp5.so AddType application/x-httpd-php .php need to be placed in your httpd.conf file in their appropriate places. |
| pidgin-2.2.1 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the ncurses, tcl, and libxml2 packages. Dependencies: gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, ncurses, tcl, libxml2, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| pidgin-2.2.1 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, most of the Dependencies below should be installed already. You will then need to install only the ncurses, tcl, and libxml2 packages. |
| pine-4.64 | ____|____ |
|
Pine requires that either libgcc-3.4.6 or gcc-3.4.6 packages be installed, and if you use openssl, you will need openssl. This package includes several programs. Configuration documentation and other items can be found in /usr/local/doc/pine. From the README file, we have Among the executables (in /usr/local/bin) are: pine The Pine mailer. Once compiled this should work just fine on your system with no other files than this binary, and no modifications to your system. Optionally you may create two configuration files, /usr/local/lib/pine.conf and /usr/local/lib/pine.info. See the documentation for details. pico The standalone editor similar to the Pine message composer. This is a very simple straight forward text editor. pilot The standalone file system navigator. imapd The IMAP daemon. If you want to run Pine in client/server mode, this is the daemon to run on the server. Installing this requires system privileges and modifications to /etc/services. See doc/tech-notes for more details. (in /usr/local/sbin along with ipop3d and ipop2d) mtest The test IMAP client, an absolutely minimal mail client, useful for debugging. rpload Utility for uploading a local pinerc or address book to an IMAP server. rpdump Utility for downloading a pinerc or address book to the local machine. mailutil Utility for performing various operations on mailboxes, be they local or remote. |
| pine-4.64 | ____|____ |
|
Pine requires that either libgcc-3.4.6 or gcc-3.4.6 packages be installed. This package includes several programs. Configuration documentation and other items can be found in /usr/local/doc/pine. From the README file, we have Among the executables (in /usr/local/bin) are: pine The Pine mailer. Once compiled this should work just fine on your system with no other files than this binary, and no modifications to your system. Optionally you may create two configuration files, /usr/local/lib/pine.conf and /usr/local/lib/pine.info. See the documentation for details. pico The standalone editor similar to the Pine message composer. This is a very simple straight forward text editor. pilot The standalone file system navigator. imapd The IMAP daemon. If you want to run Pine in client/server mode, this is the daemon to run on the server. Installing this requires system privileges and modifications to /etc/services. See doc/tech-notes for more details. (in /usr/local/sbin along with ipop3d and ipop2d) mtest The test IMAP client, an absolutely minimal mail client, useful for debugging. rpload Utility for uploading a local pinerc or address book to an IMAP server. rpdump Utility for downloading a pinerc or address book to the local machine. mailutil Utility for performing various operations on mailboxes, be they local or remote. |
| pine_ssl-4.64 | ____|____ |
|
Pine requires that either libgcc-3.4.6 or gcc-3.4.6 packages be installed, and if you use openssl, you will need openssl. This package includes several programs. Configuration documentation and other items can be found in /usr/local/doc/pine. From the README file, we have Among the executables (in /usr/local/bin) are: pine The Pine mailer. Once compiled this should work just fine on your system with no other files than this binary, and no modifications to your system. Optionally you may create two configuration files, /usr/local/lib/pine.conf and /usr/local/lib/pine.info. See the documentation for details. pico The standalone editor similar to the Pine message composer. This is a very simple straight forward text editor. pilot The standalone file system navigator. imapd The IMAP daemon. If you want to run Pine in client/server mode, this is the daemon to run on the server. Installing this requires system privileges and modifications to /etc/services. See doc/tech-notes for more details. (in /usr/local/sbin along with ipop3d and ipop2d) mtest The test IMAP client, an absolutely minimal mail client, useful for debugging. rpload Utility for uploading a local pinerc or address book to an IMAP server. rpdump Utility for downloading a pinerc or address book to the local machine. mailutil Utility for performing various operations on mailboxes, be they local or remote. |
| pine_ssl-4.64 | ____|____ |
|
Pine requires that either libgcc-3.4.6 or gcc-3.4.6 packages be installed, and if you use openssl, you will need openssl. This package includes several programs. Configuration documentation and other items can be found in /usr/local/doc/pine. From the README file, we have Among the executables (in /usr/local/bin) are: pine The Pine mailer. Once compiled this should work just fine on your system with no other files than this binary, and no modifications to your system. Optionally you may create two configuration files, /usr/local/lib/pine.conf and /usr/local/lib/pine.info. See the documentation for details. pico The standalone editor similar to the Pine message composer. This is a very simple straight forward text editor. pilot The standalone file system navigator. imapd The IMAP daemon. If you want to run Pine in client/server mode, this is the daemon to run on the server. Installing this requires system privileges and modifications to /etc/services. See doc/tech-notes for more details. (in /usr/local/sbin along with ipop3d and ipop2d) mtest The test IMAP client, an absolutely minimal mail client, useful for debugging. rpload Utility for uploading a local pinerc or address book to an IMAP server. rpdump Utility for downloading a pinerc or address book to the local machine. mailutil Utility for performing various operations on mailboxes, be they local or remote. |
| pinfo-0.6.10 | ____|____ |
|
Pinfo works best if you set the environment variable INFOPATH to include those directories that contain any of your .info files such as /usr/local/share/info, /usr/local/info, etc. |
| pinfo-0.6.10 | ____|____ |
|
Pinfo works best if you set the environment variable INFOPATH to include those directories that contain any of your .info files such as /usr/local/share/info, /usr/local/info, etc. |
| pixman-0.18.2 | ____|____ |
|
Dependencies: libiconv and to have /usr/local/lib/libgcc_s.so.1, install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| pixman-0.18.2 | ____|____ |
|
Dependencies: To have /usr/local/lib/libgcc_s.so.1, install either the libgcc-3.4.6 or gcc-3.4.6 or higher packages. |
| plotutils-2.6 | ____|____ |
|
Dependencies: libpng, zlib, libiconv, and to obtain the needed /usr/local/lib/libstdc++.so.6 and /usr/local/lib/libgcc_s.so.1 files, you should install either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| plotutils-2.6 | ____|____ |
|
Dependencies: libpng, zlib, and to obtain the needed /usr/local/lib/libstdc++.so.6 and /usr/local/lib/libgcc_s.so.1 files, you should install either libgcc-3.4.6 or gcc-3.4.6 or higher. |
| pmacct-0.14.0 | ____|____ |
|
This build uses only ./configure –enable-relax with no other options. If requests for experimental options are received, those will be added. |
| pmacct-0.14.0 | ____|____ |
|
This build uses only ./configure with no extra options. If requests for experimental options are received, those will be added. |
| poppler-0.6.2 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, all the dependencies below should be installed already except for libxml2. Dependencies: libxml2, gtk+, atk, glib, pango, libiconv, xrender, cairo, render, expat, fontconfig, freetype, libpng, jpeg, tiff, zlib, renderproto, and to have /usr/local/lib/libgcc_s.so.1 and /usr/local/lib/libstdc++.so.6, either the libgcc-3.4.6 or gcc-3.4.6 packages. |
| poppler-0.6.2 | ____|____ |
|
If you have installed the gtk+ package and its dependencies, all the Dependencies below should be installed already except for libxml2. |